Model 1088
Vacu-Gard® Tank
Blanketing Valve 1/2” (DN15)
The Model 1088 is a
valve specifically designed for small tank blanketing applications. It opens
and closes automatically as required, to maintain a closely controlled blanket
pressure. Standard valve material provides added corrosion protection at no
additional cost The simple design increases reliability and lowers maintenance
cost.
Application
On many low-pressure storage tanks the operating range is
very low, which makes blanketing and venting system selection/design a
challenge for the engineer.
The Vacu-Gard® makes the job much easier. First, the Vacu-Gard®
set point defi nition is where the blanketing valve closes bubble tight. This
gives the largest dead band between the blanketing valve set point and the set point
of the relieving device, and therefore will reduce losses. Second, the
Vacu-Gard® has a wide range of available settings, from vacuum to 14 psig, that
make proper selection easier.
BODY SIZE: 1/2"
MODEL 1088 TANK BLANKETING